They are traditionally designed for applications in equipment engineering as well as high-pressure and high-temperature applications in the chemical and petrochemical industries and, depending on the metal used, can be used in the range up to 700 °C.
Thanks to the metal sheathing, they are resistant to extreme conditions and compression set, but require comparatively high surface pressures. Particularly in equipment engineering, a high level of stability is often required, which cannot always be guaranteed reliably and permanently. Due to this property profile and the higher requirements of plant operators in terms of plant safety and availability, metal-jacketed gaskets are increasingly being replaced by more efficient and more stable sealing systems [e.g. Grooved Gaskets and Corrugated Gaskets, soft sealing gaskets with inner eyelets], especially in new plants. Metal-jacketed Gaskets can therefore generally be replaced in old systems without any problems.
Metal-jacketed Gaskets can be manufactured in a wide variety of dimensions and shapes [e.g. as frame gaskets for air coolers, with partition bars for apparatuses and heat exchangers etc.].
The gasket thickness is 3 mm [other thicknesses on request].
Operating data
| Temperatur (max) | 700 °C |
|---|---|
| Pressure (max) | 400 bar |
Gasket characteristics DIN 2505 V
| K0×Kd [N/mm] | 100 |
|---|---|
| k1 [mm] | 2 |
Gasket characteristics DIN 28090
| бVO [N/mm²] | 250 |
|---|---|
| бVU 0,1 [N/mm²] | 100 |
| m (DIN 28090) | 2 |
| бBO 300 °C [N/mm²] | 200 |
Flange shapes
| Self-centering, Raised Face (form IBC) | |
|---|---|
| Tongue and Groove (form TG) | |
| Male-Female (form SR) | |
| Apparatus, customized | |
| With partition bars |
Downloads
Maximum temperature depends on the filling and jacket material.
Other materials available on request.
General information: All information given in this Technical Information sheet represents our current level of knowledge and serves as information on our products and their respective scopes. It is not meant to ensure any particular properties of any product or the suitability of any product for any specific application, neither does it create any liability on our part.
Last Changed 2025-02-06 12:55:37