PTFE-graphite-packing without lubricant, silicone-free

  • Article Number: 2726
  • Material: 2726
  • Profile: PG/PR
2726
  • Pressure resistant, dense cross-section, excellent heat conducting and low friction properties.
  • Very good chemical resistance. Especially proven for piston pumpsand fittings.
Article Number
2726
Material
2726
Profile
PG/PR

Features

Temperatur (min) -269 °C
Temperatur (max) 260 °C
Density approx. (g/cm³) 1.4 g/cm³
Material structure PTFE- Graphit
Lubricant nein
K-factor 0.7

Fields of application

Piston pump (Vg) 3 m/s
Piston pump (p) 500 bar
Impeller pump (Vg) 10 m/s
Impeller pump (p) 40 bar
Valves (Vg) 3 m/s
Valves (p) 500 bar

Applications

abrasive and sticky media nicht geeignet
Water, Process water, Lake water geeignet
Hot water, boiler dining water geeignet
Vapors, acid gases, nitrogen geeignet
Oxygen nicht geeignet
Mineralöle, tierische Fette geeignet
Heat carrier oils, synthetic oils geeignet
Alcalia diluted, salt solutions geeignet
Alcalia concentrated geeignet
Inorganic acids diluted, salt solutions geeignet
Inorganic acids concentrated geeignet
Solvents, other organic compounds geeignet
Lacques, colors (silicone -free) geeignet

Forms of delivery

Ready-to-install, compression-molded packing rings made to measure; as complete packing sets; sold by the meter in boxes;

1 kg 3 - 7 mm vkt.
2 kg 8 - 11 mm vkt.
3,5 kg 12 - 14 mm vkt.
5 kg 15 - 19 mm vkt.
10 kg ab 20 mm vkt.

Downloads

Data Sheet
EN | Last Changed 2023-12-01

General information: All information given in this Technical Information sheet represents our current level of knowledge and serves as information on our products and their respective scopes. It is not meant to ensure any particular properties of any product or the suitability of any product for any specific application, neither does it create any liability on our part.

Last Changed 2023-12-01 13:56:42

1. Inquiry

2. How can we contact you?