PTFE-Aramid-combination packing with lubricant

  • Article Number: 2225
  • Material: 2225
  • Profile: PG/PR
2225
  • High quality (aramid continuous filaments), wear resistant and smooth. No product contamination.
  • Excellent service life for kneaders, mixers and dryers in the chemical industry.
Article Number
2225
Material
2225
Profile
PG/PR

Properties

Temperature (min.) -100 °C
Temperature (max.) 260 °C
Density approx. (g/cm³) 1.5 g/cm³
Material structure PTFE- Aramid
Waterproofing PTFE
Lubricant yes
K-factor 0.9

Range of applications

Piston pump (Vg) 5 m/s
Piston pump (p) 200 bar
Impeller pump (Vg) 15 m/s
Impeller pump (p) 20 bar
Valves (Vg) 2 m/s
Valves (p) 100 bar

Application

abrasive and sticky media suitable
Water, domestic water, sea water suitable
Hot water, boiler dining water conditionally suitable
Vapen, acid gases, nitrogen conditionally suitable
oxygen not suitable
Mineral oils, animal fats suitable
Heat carrier oils, synthetic oils conditionally suitable
Alcalia diluted, salt solutions not suitable
Alcalia concentrated not suitable
Anorg. Diluted acids, salt solutions suitable
Anorg. Acids concentrated not suitable
Solvent, otherwise. Organ. Verb. conditionally suitable
Lacques, colors (silicone -free) not suitable

Forms of delivery

Ready-to-install, compression-molded packing rings made to measure; as complete packing sets; sold by the meter in boxes;

1kg 5 - 7 mm vkt.
2 kg 8 - 11 mm vkt.
3,5 kg 12 - 14 mm vkt.
5 kg 15 - 19 mm vkt.
10 kg ab 20 mm vkt.

Downloads

Data Sheet
EN | Last Changed 2023-09-29

General information: All information given in this Technical Information sheet represents our current level of knowledge and serves as information on our products and their respective scopes. It is not meant to ensure any particular properties of any product or the suitability of any product for any specific application, neither does it create any liability on our part.

Last Changed 2023-09-29 20:02:13

1. Inquiry

2. How can we contact you?