PTFE/graphite packings with aramid edges

  • Article Number: 2226
  • Material: 2226
  • Profile: PG/PR
  • Very dense cross-section, solid structure and sturdy. The slide face made from PTFE / graphite protects the shaft surface, aramid edges prevent gap extrusion.
  • Developed for high pressure plunger pumps.
Article Number


Temperatur (min) -100 °C
Temperatur (max) 260 °C
Density approx. (g/cm³) 1.5 g/cm³
Material structure PTFE- Aramid
Waterproofing PTFE
Lubricant ja
K-factor 0.9

Fields of application

Piston pump (Vg) 3 m/s
Piston pump (p) 500 bar
Valves (Vg) 3 m/s
Valves (p) 100 bar


abrasive and sticky media geeignet
Water, Process water, Lake water geeignet
Hot water, boiler dining water geeignet
Vapors, acid gases, nitrogen geeignet
Oxygen nicht geeignet
Mineralöle, tierische Fette geeignet
Heat carrier oils, synthetic oils bedingt geeignet
Alcalia diluted, salt solutions geeignet
Alcalia concentrated nicht geeignet
Inorganic acids diluted, salt solutions geeignet
Inorganic acids concentrated bedingt geeignet
Solvents, other organic compounds bedingt geeignet
Lacques, colors (silicone -free) nicht geeignet

Forms of delivery

Ready-to-install, compression-molded packing rings made to measure; as complete packing sets; sold by the meter in boxes;

1kg 5 - 7 mm vkt.
2 kg 8 - 11 mm vkt.
3,5 kg 12 - 14 mm vkt.
5 kg 15 - 19 mm vkt.
10 kg ab 20 mm vkt.


Data Sheet
EN | Last Changed 2023-12-01

General information: All information given in this Technical Information sheet represents our current level of knowledge and serves as information on our products and their respective scopes. It is not meant to ensure any particular properties of any product or the suitability of any product for any specific application, neither does it create any liability on our part.

Last Changed 2023-12-01 13:56:52

1. Inquiry

2. How can we contact you?