Aramid-continuous filament-packing with PTFE impregnation and lubricant

  • Article Number: 2722
  • Material: 2722
  • Profile: PG/PR
2722
  • Very good wear resistance, especially proven against abrasive media in the sugar and cellulose industry as well as for waste water applications.
  • Recommendation: Relief of packing in the start-up phase. Surface hardness of shaft or sleeve 50-60 HRC
Article Number
2722
Material
2722
Profile
PG/PR

Features

Temperatur (min) -100 °C
Temperatur (max) 280 °C
Density approx. (g/cm³) 1.4 g/cm³
Material structure Aramid
Waterproofing PTFE
Lubricant ja
K-factor 0.9

Fields of application

Piston pump (Vg) 1.5 m/s
Piston pump (p) 100 bar
Impeller pump (Vg) 20 m/s
Impeller pump (p) 50 bar

Applications

abrasive and sticky media geeignet
Water, Process water, Lake water geeignet
Hot water, boiler dining water geeignet
Vapors, acid gases, nitrogen bedingt geeignet
Oxygen nicht geeignet
Mineralöle, tierische Fette geeignet
Heat carrier oils, synthetic oils bedingt geeignet
Alcalia diluted, salt solutions geeignet
Alcalia concentrated nicht geeignet
Inorganic acids diluted, salt solutions geeignet
Inorganic acids concentrated nicht geeignet
Solvents, other organic compounds bedingt geeignet
Lacques, colors (silicone -free) nicht geeignet

Forms of delivery

Ready-to-install, compression-molded packing rings made to measure; as complete packing sets; sold by the meter in boxes;

1 kg 3 - 7 mm vkt.
2 kg 8 - 11 mm vkt.
3,5 kg 12 - 14 mm vkt.
5 kg 15 - 19 mm vkt.
10 kg ab 20 mm vkt.

Downloads

Data Sheet
Details: EN | Last Changed 2023-12-01

General information: All information given in this Technical Information sheet represents our current level of knowledge and serves as information on our products and their respective scopes. It is not meant to ensure any particular properties of any product or the suitability of any product for any specific application, neither does it create any liability on our part.

Last Changed 2023-12-01 13:56:53

Contact our sales team

Get in touch if you have question about our products.

1. Inquiry

Please describe your requirements, such as number, dimensions and use, as precisely as possible.

2. How can we contact you?