Features
| Temperatur (min) | -269 °C |
|---|---|
| Temperatur (max) | 300 °C |
| Density approx. (g/cm³) | 1.4 g/cm³ |
| Material structure | Graphitfolie/ PTFE |
Fields of application
| Valves (Vg) | 2 m/s |
|---|---|
| Valves (p) | 300 bar |
Applications
| abrasive and sticky media | not suitable |
|---|---|
| Water, Process water, Lake water | suitable |
| Hot water, boiler dining water | suitable |
| Vapors, acid gases, nitrogen | suitable |
| Oxygen | not suitable |
| Mineral oils, animal fats | suitable |
| Heat carrier oils, synthetic oils | suitable |
| Alcalia diluted, salt solutions | suitable |
| Alcalia concentrated | limited suitability |
| Inorganic acids diluted, salt solutions | suitable |
| Inorganic acids concentrated | limited suitability |
| Solvents, other organic compounds | limited suitability |
| Lacques, colors (silicone -free) | limited suitability |
Approvals and test reports
| TA Luft 2002 (VDI 24A0/2200) |
|
The packing set was tested without disk suspension, at 400°C and 40 bar. The maximum operating temperature recommended by us is 300°C. Further information on the use of fluoropolymers, especially at elevated temperatures, can be found in the document "Guide for the Safe Handling of Fluoropolymer Resins" (issue 06/2021). |
Forms of delivery
compression-moulded packing ring or packing set
Dimensions on request
Downloads
General information: All information given in this Technical Information sheet represents our current level of knowledge and serves as information on our products and their respective scopes. It is not meant to ensure any particular properties of any product or the suitability of any product for any specific application, neither does it create any liability on our part.